FOSSiBOT FAC580 DC-DC Battery Charger | 580W

FAQ

• Q1: What are the advantages of the FAC580 compared to a traditional car cigarette lighter port?

  A: A traditional 12V cigarette lighter port provides a maximum output of 100W (200W for 24V systems), while the F580 delivers up to 580W of output power — 6 times faster vehicle charging.

• Q2: Which types of vehicles are compatible?

  A: Suitable for all fuel-powered vehicles equipped with 12V/24V starter batteries, including:
  • RVs / Campervans
  • Commercial vans
  • Trucks and construction vehicles

• Q3: Is it compatible with hybrid or electric vehicles?

  A: Compatible with hybrid vehicles (must have an alternator and starter battery).
  Not compatible with pure electric vehicles due to different power system architectures.

• Q4: Will it drain my car battery? Do I need to turn it off manually?

  A: The FAC580 automatically shuts off when the battery voltage drops below 12.5V (or 12V), preventing battery drain. No manual shutdown is required.

• Q5: Will long-term use affect the car battery’s lifespan?

  A: The dual-voltage mode (12.0V / 12.5V) helps protect the battery. With proper use, it won’t cause measurable lifespan reduction.

• Q6: Does it increase fuel consumption?

  A: The impact is negligible — it uses the alternator’s surplus power (<0.5L/100km under typical conditions).

• Q7: Installation precautions

  • Make sure the vehicle is turned off before installation.
  • Perform a test fit to confirm functionality before final installation.
  • Operate only one terminal (positive or negative) at a time to • avoid short circuits or shock.
  Wear protective gear such as gloves and safety goggles.
  • Professional installation is recommended for optimal safety.

• Q8: Required tools for installation

  • Required: Wrench (for battery terminal bolts)
  • Optional: Drill + wooden board (if installing in the trunk)
  • Included: Hex screwdriver (for cable connection)
  • Note: Leave at least 10cm of clearance for cooling airflow.

• Q9: Does it need to be mounted in a fixed position?

  A: Installation position is flexible — just ensure proper ventilation for the cooling fan.

• Q10: Can beginners install it themselves?

  A: Yes.
  Simple installation with detailed instructional videos provided.
  The most complex step (routing cable from engine bay to trunk) is demonstrated step-by-step.

• Q11: Must I use the original cable?

  A: The standard package includes a 5-meter 6AWG cable. Using the original cable is recommended.
  If using your own, ensure cable reliability and proper gauge.

• Q12: What if charging fails while driving?

  • After stopping the vehicle, check the following:
  Are positive and negative connections correct?
  • Are cable terminals firmly secured?
  • Restart the engine and observe the indicator light.
  • Keep the engine running to charge the car battery.
  If the issue persists, contact technical support.

• Q13: Which power stations are compatible?

  A: Compatible with all FOSSiBOT models and third-party devices that feature MC4 solar input ports (charging rate may vary).
  Ensure the third-party device supports up to 50V input voltage.

• Q14: Why can’t I reach the rated 580W output?

  Please check:
  • Your power station supports 580W DC input.
  • The FAC580 is well-ventilated and operating below 40°C.
  

• Q15: What is the actual input current?

  • 12V vehicles: ≤45A
  • 24V vehicles: ≤22.5A

• Q16: Why is it 6 times faster than a cigarette lighter?

  Cigarette lighter output: approx. 100W
  FAC580 stable output: 580W (lab-tested)

• Q17: Which port should I connect to on my portable power station for charging?

  • F800 & F1200: XT60 input port
  • F2400 & F3600 Pro: XT90 input port