Przenośna stacja zasilania FOSSiBOT F3600 Pro | 3600W 3840Wh

A: Runtime depends on the actual power consumption of your devices. You can estimate the runtime using the following formulas:

For devices rated at 500W or less:

Estimated Runtime (hours) ≈ 3,840Wh × 0.85 ÷ (Device Wattage + Power Station's Self-Consumption)

For devices rated above 500W:

Estimated Runtime (hours) ≈ 3,840Wh × 0.85 ÷ Device Wattage

Examples:

• 500W device: Approximately 6.5 hours
• 800W device: Approximately 4.1 hours
• 1,000W device: Approximately 3.3 hours

Note: Actual runtime may vary depending on power consumption, operating modes, ambient temperature, and conversion efficiency.

A: For example, the F3600 Pro can power a 60W portable refrigerator for approximately 2.3 days under reference conditions.

Actual runtime depends on ambient temperature, cooling settings, refrigerator load, and how frequently the compressor operates.

A: Yes. The F3600 Pro can power an air conditioner as long as its running power does not exceed 3,600W and its startup surge does not exceed 7,200W.

For example, an 800W portable air conditioner can run for approximately 4 hours under reference conditions. Actual runtime depends on the air conditioner's operating cycle and power consumption.

A: Yes. The F3600 Pro is suitable for RVs, campervans, and travel trailers. It can power essential appliances such as air conditioners, refrigerators, coffee makers, microwaves, TVs, and lighting.

It offers multiple output options, including:

• AC Output: 3,600W
• RV Output: 12V/25A, 300W
• Car Output: 12V/10A, 120W
• USB Outputs: For charging phones, tablets, and other USB-powered devices

A: Press the AC button to turn on the AC output.

To switch between 50Hz and 60Hz:

Press and hold the AC button for 3 seconds to enter frequency adjustment mode. Then press the AC button again to select the desired frequency.

To switch between 220V and 230V:

Quickly press the AC button 10 times in succession to enter voltage adjustment mode.

A: Yes. The F3600 Pro supports simultaneous charging and discharging, allowing you to power connected devices while recharging the power station through solar panels, an AC outlet, or a vehicle charging source.

A: The F3600 Pro supports up to 2,000W of solar input with the following specifications:

• Input Voltage: 11.5–160V
• Maximum Input Current: 20A
• Maximum Solar Input Power: 2,000W
• Input Connector: XT90

Make sure your solar panel setup meets these requirements before connecting it to the power station.

A: Yes. The F3600 Pro is compatible with third-party solar panels, provided they meet the following input requirements:

• Input Voltage: 11.5–160V
• Maximum Input Current: 20A
• Maximum Input Power: 2,000W
• Connector: XT90

If your solar panels use a different connector, you will need a compatible cable or adapter.

A: A solar panel's rated wattage is measured under ideal Standard Test Conditions (STC). Actual power output can vary due to several factors, including sunlight intensity, panel orientation, temperature, shading, dust, and cable losses.

Even on a sunny day, excessive heat can reduce solar panel efficiency, resulting in lower output than the rated wattage.

For better charging performance, position your solar panels toward direct sunlight, avoid shading, and ensure adequate ventilation behind the panels.

A: Yes. The F3600 Pro supports multiple solar panels connected in series or parallel, provided the combined input stays within the supported limits of 11.5–160V, 20A, and 2,000W.

When using FOSSiBOT solar panels, the estimated charging times are:

• 4 × SP400 Pro (400W): Approximately 2.4 hours
• 8 × SP200 / SP200 Pro (200W): Approximately 2.4 hours
• 8 × SP100 Pro (100W): Approximately 4.8 hours

Note: These are reference charging times. Actual charging performance depends on sunlight intensity, weather conditions, panel orientation, temperature, and the electrical configuration of the panels.

A: The F3600 Pro supports multiple charging methods with the following estimated charging times:

• AC Charging (up to 2,200W): Approximately 1.7 hours
• AC + Solar Charging (up to 4,200W): Approximately 1.5 hours
• Car Charging (96W): Approximately 40 hours
• FAC580 DC-DC Charging (up to 580W): Approximately 6.62 hours

For solar-only charging estimates, please refer to Q11.

Note: Actual charging times may vary depending on available input power, battery temperature, and charging conditions.

A: Yes. The F3600 Pro supports charging through a vehicle's charging outlet at 96W, with an estimated full charging time of approximately 40 hours.

For faster charging on the road, you can use the FOSSiBOT FAC580 DC-DC Alternator Charger, which delivers up to 580W of charging power and can fully charge the F3600 Pro in approximately 6.62 hours under reference conditions.

A: The F3600 Pro features an automatic shutdown function to reduce unnecessary power consumption. The default settings are:

• Main Power and USB: Automatically shut down after 5 minutes with no output detected.
• AC and DC Outputs: Automatically shut down after 8 hours with no output detected.

This is a normal energy-saving feature, not a malfunction. You can also adjust the automatic shutdown settings through the FOSSiBOT app according to your needs.

A: Yes. The F3600 Pro supports the FOSSiBOT FB3840 Expansion Battery.

The F3600 Pro has a built-in battery capacity of 3,840Wh and supports up to two FB3840 expansion batteries, increasing the total capacity to 11,520Wh (approximately 11.5kWh).

Available configurations:

• F3600 Pro Only: 3,840Wh
• F3600 Pro + 1 × FB3840: 7,680Wh
• F3600 Pro + 2 × FB3840: 11,520Wh

This expandable capacity makes it suitable for extended outdoor trips, RV adventures, and home backup power needs.

A: We do not recommend leaving the F3600 Pro inside a closed vehicle exposed to direct sunlight for extended periods.

The recommended operating temperature ranges are:

• Charging Temperature: 0–40°C (32–104°F)
• Discharging Temperature: -10–40°C (14–104°F)

When the temperature exceeds 40°C (104°F), the power station may not be able to maintain full output performance.

If the battery temperature reaches the high-temperature protection threshold of approximately 55–66°C (131–151°F), the system will stop discharging to protect the battery.

For safe operation, keep the F3600 Pro away from direct sunlight and place it in a cool, well-ventilated area, especially during hot weather.